Monday, June 22, 2009

Tau Heavy Gun Drones WIP

Here are the basic bitz used: A 40mm base, 2x small flying bases, a battle suit head, a burst cannon, a fusion blaster, and a targeting array.


A converted markerlight using a fusion blaster and a tube from canned air. Also the bit that goes under the disk using a battle suit head, 1/8" tubing and a wooden "cap".


The assembled drone. I built a unit of 6, but have since cut off the burst canons and markerlights and re-attached them with magnets.


C&C welcome!! Thanks!
at
Labels: , , , , ,

2 comments:

  1. Narric TechnaDecember 19, 2012 at 5:12 AM

    Its a very cool conversion, but I can't help but think the cost of the parts individually, would result in a higher price then a set of Forge World drones.

    ReplyDelete
  2. ZorconDecember 19, 2012 at 7:55 AM

    Thanks! That might be true, but everything but the targeting arrays were pulled from my bitz box. (I picked up a bunch of arrays really cheap off eBay)

    ReplyDelete

Subscribe to: Post Comments (Atom)